NEWS | SOFTWARE | SHEET

Three types of Concrete Foundations

The foundation of a residence or another structure is the major component of the whole construction. Furthermore, it implies that the building has stability as well as that the structure is safeguarded from yearly freeze and thaw cycles.

Moreover, concrete foundation services utilize 3 major sorts of foundations as well as every single one has its own definite benefits for builders as well as property-owners.

1. T-Shaped:

That sort of concrete foundation is among the most prevalent sorts of foundations utilized in house construction as well as additional buildings. On the other hand, they are generally utilized underneath structures/buildings in regions wherein/where the land/ground freezes at the time of the winter. Moreover, it obtains its title from the form of the footing that appears similar to an inverted “T”.

Furthermore, the footing is positioned beneath the frost line as well as the walls are built and poured at the top. Moreover, the slab is subsequently poured amid the walls.

That sort of foundation is helpful for the reason that it offers the structure an additionally protected footing because of the width. Also, it is among the high-cost sorts of foundations for the reason that it needs 3 distinct pours to complete the work.

2. Slab-on-grade foundation:

Like the title indicates, a slab is an individual/one layer of concrete, various inches thick. Moreover, the slab is poured thick/thicker on the sides/edges, to create an integrated/integral footing, strengthening/reinforcing rods support the thick/thickened side/edge. Also, the slab usually situates on a crushed gravel bed to enhance drainage.

Furthermore, setting/casting a wire mesh in the concrete decreases the possibility of fissuring/cracking. Moreover, a slab on grade is appropriate in regions wherein/where the land/ground does not freeze, however it may even be suited/adapted with covering/insulation to avert it from getting impacted via the frost heaves.

3. Frost Protected:

That technique simply complies with a warm/heating/heated building/structure. Moreover, it depends on the utilization of 2 sheets of rigid/firm, polystyrene insulation - 1 on the exterior of the foundation wall as well as another placed level/even on a gravel bed at the wall base — to avert freezing that is an issue with slab-on grade foundations in regions with frost.

Moreover, the insulation takes heat from the building/structure in the ground underneath the footings as well as averts loss of heat from the slab edge. That heat maintains the ground temperature nearby the footings over/above freezing.

For additional info view the video:

Lecturer: watermarkandcompany

Three types of Concrete Foundations