NEWS | SOFTWARE | SHEET

How to Set Up a Total Station

Installing the device anyplace:

A. Expand the tripod legs to the extent that is needed and tauten the screws securely.
B. Install the tripod in order that the tripod plate is as level as feasible and the tripod legs are stable in the base.

C. Then, put the device on the tripod and set it with the middle fixing screw.

Extending the instrument: Subsequent to installing the device, extend it nearly with the circular bubble.

Move 2 of the foot screws jointly in different ways (directions). Right hand’s index finger signifies the way (direction) in which the bubble must be in motion (instance, top right). Then, utilize the 3rd foot screw to centralize the bubble (instance, base right).

To verify, turn the device one eighty degree. Subsequently, the bubble must stay in the set circle. In case it doesn’t, then change is needed (acknowledge the guide).

Considering a grade, the compensator mechanically manages the concluding extending (levelling up). The compensator comprises primarily of a string-dangled mirror that administers the level light beam to the middle of the crosshair, although there’s remaining slant in the telescope (instance, base).

In case currently you gently touch a tripod leg, in that case (in case the circular bubble is centralized) you’ll observe in what way the sight line sways around the staff reading and continually sets at the similar spot. That is the method to check if or not the compensator can sway directly.

Installing the total station above a base spot:

A. Put the tripod nearly above the base spot.
B. Check the tripod from several aspects and areas and rectify its place in order that the tripod plate is approximately level and over the base spot (instance, top left).
C. Move the tripod legs securely into the base and utilize the middle fixing screw to set the device on the tripod.

D. Turn on the laser plummet (and, for old devices, check the optical plummet) and move the foot screws in order that the optical plummet or laser point is centralized on the base spot (instance, top right).

E. Centralize the circular bubble by changing the tripod legs’ dimensions (lenghts) (instance, beneath).
F. Subsequent to correctly extending (levelling up) the device, let go the middle fixing screw in order that one can move it on the tripod plate up to the laser point is centralized accurately above the base spot.
G. Tauten the middle fixing screw once more.

Article Source: www.onlinecivilforum.com